Milwaukee 6147-30 4-1/2" Small Angle Grinder Paddle, Lock-On
MSRP $169.00
$99.00 USD
BuyNow
Features

-Powerful 11 Amp, 11,000 RPM Motor: Provides maximum performance and durability

-Tool-Free Accessory Change: Easily change "All Accessories" without a wrench

-Tool-Free Adjustable Guard: Provides quick guard installations and adjustments

-Advanced Airflow System: Maximizes airflow and reduces debris ingress, improving motor life and performance

-Debris Baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents

Includes

-(1) 11 Amp 4-1/2" Small Angle Grinder Paddle, Lock-On (6147-30)

-Type 27 Guard

-Side Handle

-Spanner Wrench

-Flanges

Specs

-Wheel Diameter

4-1/2"

-Volts

120 AC Only

-Switch Type

Paddle, Lock-On

-AMPS/Overload Protection

11 Amp

-Max Watts Out (Power)

1400 MWO

-Speed RPM

11,000

-Use Wheels RPM Above

11,000

-Motor

High Capacity Motor

-Completely Tool-Free Accessory Change

Yes

-Burst Resistant Guard

Yes

-Tool-Free Guard

Yes

-Advanced Airflow System

Yes

-Cord Type

2-Wire

-Cord Length

8'

-Double Insulated

Yes

-Tool Length

11.57"

-Net Tool Weight

5.4 lbs

-Ship Weight

7.2 lbs

-Spindle Thread

5/8"-11

Milwaukee 6147-31 4-1/2" Small Angle Grinder Paddle, No-Lock
MSRP $169.00
$99.00 USD
BuyNow
Features

-Powerful 11 Amp, 11,000 RPM Motor: Provides maximum performance and durability

-Tool-Free Accessory Change: Easily change "All Accessories" without a wrench

-Tool-Free Adjustable Guard: Provides quick guard installations and adjustments

-Advanced Airflow System: Maximizes airflow and reduces debris ingress, improving motor life and performance

-Debris Baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents

Includes

-(1) 11 Amp 4-1/2" Small Angle Grinder Paddle, No-Lock (6147-31)

-Type 27 Guard

-Side Handle

-Spanner Wrench

-Flanges

Specs

-Wheel Diameter

4-1/2"

-Volts

120 AC Only

-Switch Type

Paddle, No-Lock

-AMPS/Overload Protection

11 Amp

-Max Watts Out (Power)

1400 MWO

-Speed RPM

11,000

-Use Wheels RPM Above

11,000

-Motor

High Capacity Motor

-Completely Tool-Free Accessory Change

Yes

-Burst Resistant Guard

Yes

-Tool-Free Guard

Yes

-Advanced Airflow System

Yes

-Cord Type

2-Wire

-Cord Length

8'

-Double Insulated

Yes

-Tool Length

11.57"

-Net Tool Weight

5.4 lbs

-Ship Weight

7.2 lbs

-Spindle Thread

5/8"-11

Dewalt D28065 5" / 6" High Performance Grinder w/ Trigger Grip
MSRP $279.00
$169.00 USD
BuyNow
Features

- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection

- Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

- Quick-Change™ Wheel Release allows tool free wheel removal

- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

- One-piece brush arm prevents brush hang-up due to dust ingestion

- Vibration-reducing side handle increases comfort for extended use applications

- Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

- Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-(1) 5" / 6" High Performance Grinder w/ Trigger Grip (D28065)

-5" keyless adjustable guard

-6" keyless adjustable guard

-Wrench

-2-position side handle

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Trigger

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

No

-Tool Length

15.25"

-Tool Weight

4.75lbs

Dewalt D28065N 5" / 6" High Performance Grinder w/ No-Lock On Trigger Grip
MSRP $279.00
$169.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-2-position side handle

-5" keyless adjustable guard

-6" keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Trigger

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

No

-Tool Length

15.25"

-Tool Weight

4.75lbs

Dewalt D28110 4-1/2" (115mm) Small Angle Grinder
MSRP $119.00
$64.99 USD
BuyNow
Features

-7.0 Amp AC/DC, 11,000 rpm motor designed for faster material removal and higher overload protection

-Quick-Change™ Wheel Release allows tool free wheel removal without need for a wrench

-Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces

-Oversized, protected spindle lock button provides easier and quicker wheel changes

-2-position removable side handle provides increased comfort and control

-Slim, ergonomic body design provides increased comfort in extended use applications

-5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories

Includes

-2-position side handle

-Depressed center wheel

-Adjustable guard

-Wrench

Specs

-Amps

7.0Amps

-Max Watts Out

800W

-Horsepower

1.1HP

-No Load Speed

11,000rpm

-Use Wheels rpm Above

11,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Slide

-Dust Ejection System™

No

-Tool-Free Flange System

Yes

-Tool Length

10-3/4"

-Tool Weight

4.1lbs

Dewalt D28114 4-1/2" - 5" High Performance Grinder
MSRP $269.00
$159.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-2-position side handle

-Depressed center wheel

-Keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

11,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Paddle w/ lock-on

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28114N 4-1/2" / 5" High Performance No-Lock On Paddle Switch Grinder
MSRP $269.00
$159.00 USD
BuyNow
Features

-13.0 Amp / 2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-No Lock-On paddle switch prevents the user from locking the grinder on

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-Wrench

-Two position side handle

-Depressed center wheel

-Keyless adjustable guard

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

11,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Paddle no lock-on

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28115 4-1/2" / 5" High Performance Grinder w/ Trigger Grip
MSRP $259.00
$159.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-Two position side handle

-Wrench

-5" keyless adjustable guard

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Trigger

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

No

-Tool Length

15.25"

-Tool Weight

4.6lbs

Dewalt D28115N 4-1/2" / 5" High Performance Grinder w/ No-Lock On Trigger Grip
MSRP $259.00
$159.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-2-position side handle

-5" keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Trigger

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

No

-Tool Length

15.25"

-Tool Weight

4.75lbs

Dewalt D28131 4-1/2" - 5" High Performance Grinder
MSRP $269.00
$159.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-One-piece brush arm prevents brush hang-up due to dust ingestion

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

-Lock-on slide switch provides increased user comfort in extended use applications

Includes

-2-position side handle

-Depressed center wheel

-Keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

11,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Slide

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28140 6" High Performance Cut-Off/Grinder
MSRP $269.00
$199.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-Dual Clutch Protection™ prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration reducing 2-position side handle provides user comfort and reduces user felt vibration

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

-Lock-on slide switch provides increased user comfort in extended use applications

Includes

-(1) 5" (125 mm) / 6" (150 mm) High Performance Cut-Off/Grinder with Slide Switch (D28140)

-Type 27 depressed center wheel

-Type 27 keyless adjustable guard

-Type 1 cutting wheel

-Type 1 keyless adjustable guard

-Wrench

-2-position side handle

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11"

-Switch Type

Slide

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28144 6" High Performance Cut-Off/Grinder
MSRP $319.00
$199.00 USD
BuyNow
Features

-13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-Dual Clutch Protection™ prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration reducing 2-position side handle provides user comfort and reduces user felt vibration

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-2-position side handle

-Type 27 depressed center wheel

-Type 27 keyless adjustable guard

-Type 1 cutting wheel

-Type 1 keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Paddle w/ lock-on

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28144N 6" High Performance Cut-Off/Grinder w/ No Lock-On Paddle Switch
MSRP $319.00
$199.00 USD
BuyNow
Features

-13.0 Amp / 2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection

-No Lock-On paddle switch prevents the user from locking the grinder on

-Dual Clutch Protection™ prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability

-Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents

-Quick-Change™ Wheel Release allows tool free wheel removal

-Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion

-One-piece brush arm prevents brush hang-up due to dust ingestion

-Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch®, Power-Off®, and Power-Loss Reset®

-E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor

-Power-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-up

-Power-Loss Reset® prevents accidental re-starts following a power disruption when the tool is left in the "on" position

-Vibration-reducing side handle increases comfort for extended use applications

-Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

-Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

Includes

-2-position side handle

-Type 27 depressed center wheel

-Type 27 keyless adjustable guard

-Type 1 cutting wheel

-Type 1 keyless adjustable guard

-Wrench

Specs

-Amps

13.0Amps

-Max Watts Out

1,700W

-Horsepower

2.3HP

-No Load Speed

9,000rpm

-Spindle Thread

5/8"-11

-Switch Type

Paddle no lock-on

-Dust Ejection System™

Yes

-Tool-Free Flange System

Yes

-E-Clutch® / Overload Protection

Yes

-Tool Length

13"

-Tool Weight

4.6lbs

Dewalt D28474W 7" (180mm) Large Angle Grinder
MSRP $289.00
$179.00 USD
BuyNow
Features

-High power 4 HP (maximum motor HP) 8,000 rpm motor with overload protection provides higher operating speeds under load

-Epoxy coated field and armature provide long service life against abrasion from airborne debris

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

-Low profile gearcase allows for work in tight areas

-Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage

-5 position side handle provides improved ergonomics for specific applications

-8,000 rpm provides optimal material removal with 7" grinding wheels

-2 wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates

-Lightweight design increases productivity in extended use applications

Includes

-7" guard

-5 position side handle

-7" grinding wheel

Specs

-Amps

15.0Amps

-Max Watts Out

3,084W

-Horsepower

4.1HP

-No Load Speed

8,000rpm

-Use Wheels rpm Above

8,000rpm

-Spindle Lock

Yes

-Spindle Thread

5/8"-11

-Trigger Lock-On

Yes

-Lock-Off Trigger

No

-Motor Abrasion Protection

Yes

-Steel-Cut Gears

Yes

-Tool Length

19.2"

-Tool Weight

13.15lbs

Dewalt D28499X 7" & 9" 5.3 HP Large Angle Grinder
MSRP $369.00
$219.00 USD
BuyNow
Features

-High power 5.3 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load

-Epoxy coated field and armature provide long service life against abrasion from airborne debris

-Keyless adjustable guard provides tool-free guard adjustments, increasing productivity

-Rotating rear handle provides improved ergonomics in cutting and grinding applications

-Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage

-6,000 rpm provides optimal material removal with 9" grinding wheels

-2 wire double insulated & jacket rubber cord provides increased durability and life in hot and cold climates

-Low profile gearcase allows for work in tight areas

-5 position side handle provides improved ergonomics for specific applications

-Lightweight design increases productivity in extended use applicationsLightweight design increases productivity in extended use applications

Includes

-7" & 9" guard

-5 position side handle

Specs

-Amps

15.0Amps

-Max Watts Out

3,950W

-Horsepower

5.3HP

-No Load Speed

6,000rpm

-Use Wheels rpm Above

6,000rpm

-Spindle Lock

Yes

-Spindle Thread

5/8"-11

-Trigger Lock-On

Yes

-Lock-Off Trigger

No

-Motor Abrasion Protection

Yes

-Steel-Cut Gears

Yes

-Tool Length

20.7"

-Tool Weight

14.5lbs