Dewalt D25851K 12 lb. Spline Demolition Hammer
MSRP $1109.00
$649.00 USD
BuyNow
Features

-13.5 Amp motor maximum performance and overload protection

-9.5 ft-lbs of impact provides powerful chipping and faster destruction rates

-SHOCKS "“ Active Vibration Control® reduces vibration up to 50% while increasing user comfort and productivit

-Electronic variable speed allows the user to control the speed of chipping and impact energy

Includes

-Side handle

-Bit Grease

-Kit Box

-Users Guide

Specs

-Impact Energy

9.5ft-lbs

-Vibration Control

Yes - SHOCKS

-Vibration Measurement

8.3 m/s2

-Amps

13.5Amps

-Loaded Speed (BPM)

1430 - 2840bpm

-Variable Impact Control Dial

7 Settings

-Chisel Rotation

Yes - Manual

-Tool Length

18.6""

-Tool Weight

14lbs

Dewalt D25891K SDS MAX Demo Hammer
MSRP $1389.00
$799.00 USD
BuyNow
Features

-SHOCKS "“ Active Vibration Control® reduces vibration by up to 50%

-15 ft-lbs of impact energy provides maximum performance in chipping applications

-15 Amp motor provides maximum overload protection & power

-Lock-on slide switch provides increased user comfort in extended use applications

-Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service

Includes

-1 X D25891K SDS MAX Demo Hammer

Specs

-Impact Energy

15ft-lbs

-Vibration Control

Yes

-Vibration Measurement

12.4 m/s2

-Amps

15Amps

-Loaded Speed (BPM)

1,152-2,304bpm

-Variable Impact Control Dial

8 Settings

-Chisel Rotation

Yes

-Tool Length

23"

-Tool Weight

19lbs

Dewalt D25899K 21 lb SDS Max Demolition Hammer
MSRP $1189.00
$739.00 USD
BuyNow
Features

-14.0 Amp motor provides high performance and overload protection

-Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life

-Spring-loaded dust seals ensure longer tool life

-Large on/off rocker switch allows for easy single finger operation

-One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool

-Large rear rubber handle allows easy operation with 1 or 2 hands

-Variable position side handle allows 360° rotation and 150° adjustment for ease of use

-In-line design for easy operation of tool in horizontal or vertical applications

-SDS max tool holder with rubber dampers absorbs energy providing longer life

Includes

-360° adjustable side handle

-Kit Box

Specs

-Impact Energy

18.5ft-lbs

-Vibration Control

Yes

-Vibration Measurement

11.5 m/s2

-Amps

14Amps

-Max Watts Out

750W

-Loaded Speed (BPM)

2,040 bpm

-Variable Impact Control Dial

19 Settings

-Chisel Rotation

One-step, 12 Positions

-Tool Length

25.8"

-Tool Weight

21.2lbs

Dewalt D25901K 22 lb. SDS Max Demolition Hammer with SHOCKS®
MSRP $1549.00
$919.00 USD
BuyNow
Features

-14.0 Amp motor provides high performance and overload protection

-SHOCKS "“ Active Vibration Control® reduces vibration resulting in less user fatigue and more productivity

-Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life

-Spring-loaded dust seals ensure longer tool life

-Variable impact control dial (19 settings) ensures accurate impact energy depending on the application

-Large on/off rocker switch allows for easy single finger operation

-One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool

-Large rear rubber handle allows easy operation with 1 or 2 hands

-Variable position side handle allows 360° rotation and 150° adjustment for ease of use

-In-line design for easy operation of tool in horizontal or vertical applications

-SDS max tool holder with rubber dampers absorbs energy providing longer life

Includes

-360° adjustable side handle

-Kit Box

Specs

-Impact Energy

3.7-18.5ft-lbs

-Vibration Control

Yes - SHOCKS

-Vibration Measurement

8.0 m/s2

-Amps

14Amps

-Max Watts Out

750W

-Loaded Speed (BPM)

1,020-2,040bpm

-Variable Impact Control Dial

19 Settings

-Chisel Rotation

One-step, 12 Positions

-Tool Length

26.8"

-Tool Weight

21.6lbs

Dewalt D25941K 26 lb. 3/4" (19mm) Hex Demolition Hammer
MSRP $1729.00
$1029.00 USD
BuyNow
Features

-15.0 Amp motor provides high performance and overload protection

-Active Vibration Control AVC™ reduces vibration resulting in less user fatigue and more productivit

-Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life

-Spring-loaded dust seals ensure longer tool life

-Large on/off rocker switch allows for easy single finger operation

-One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool

-Large rear rubber handle allows easy operation with 1 or 2 hands

-Variable position side handle allows 360° rotation and 150° adjustment for ease of use

-In-line design for easy operation of tool in horizontal or vertical applications

-3/4" Hex toolholder with rubber dampers absorb energy providing longer life

Includes

-360° adjustable side handle

-Kit Box

Specs

-Impact Energy

22ft-lbs

-Vibration Control

Yes - SHOCKS

-Vibration Measurement

9.0 m/s2

-Amps

15Amps

-Max Watts Out

750W

-Loaded Speed (BPM)

1620bpm

-Variable Impact Control Dial

No Settings

-Chisel Rotation

One-step, 12 Positions

-Tool Length

29.7"

-Tool Weight

27.2lbs

Makita HM0810B 11 lb. Demolition Hammer; Accepts 3/4" Hex Shank Bits
MSRP $659.00
$419.00 USD
BuyNow
Features

-Compact with less weight for maximum control

-Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience

-Innovative anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue

-One-touch tool retainer action for quick bit changes

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended life brushes are longer for more work between service intervals and less downtime

-Factory grease packed for reduced maintenance

-Ideal for light chiseling, chipping and scaling operations

-Accepts 3/4" Hex Shank bits

Includes

-Hex Wrench (783202-0)

-Tool Case

Specs

-Blows per Minute

2,900 BPM

-Impact Energy

7.6 Joules

-AMPS (115V)

8.3

-Vibration (m/s2)

8

-Bit Type

3/4" Hex Shank Bits

-Overall Length

16-5/8"

-Net Weight (lbs.)

12.8

Makita HM0870C 11 lb. Demolition Hammer; Accepts SDS-MAX Bits
MSRP $839.00
$529.00 USD
BuyNow
Features

-Hard hitting (11.4J) with less weight (11.1 lbs.); ideal for horizontal work

-Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

-Soft start suppresses start-up reaction for more control and better accuracy

-Variable speed control dial enables user to match the speed to the application for greater versatility

-L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced

-L.E.D. power light indicates switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended life brushes are longer for more work between service intervals and less downtime

-12 bit angle settings allow the bit to be set at different positions for operating convenience

-Automatic brush cut-off protects commutator from damage for longer tool life

-Rubberized ergonomic soft grip provides more comfort and control

-Accepts SDS-MAX bits

Includes

-Side Handle

-Bit Grease

-Cleaning Cloth

-Tool Case

Specs

-Blows per Minute

1,100 - 2,650 BPM

-Impact Energy

11.4 Joules

-.

8.4 ft.lbs.

-AMPS (120V)

10.0

-Vibration (m/s2)

11.0

-Bit Type

Accepts SDS-MAX Bits

-Overall Length

17-3/4"

-Net Weight (lbs.)

11.1

-Shipping Weight (lbs.)

16.8

Makita HM1203C 20 lb. Demolition Hammer; Accepts SDS-MAX Bits
MSRP $969.00
$739.00 USD
BuyNow
Features

-Hard hitting (25.5J) with less weight (20.3 lbs.); ideal for horizontal work

-Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

-Soft start suppresses start-up reaction for more control and better accuracy

-Variable speed control dial enables user to match the speed to the application for greater versatility

-L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced

-L.E.D. power light indicates switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended life brushes are longer for more work between service intervals and less downtime

-12 bit angle settings allow the bit to be set at different positions for operating convenience

-Automatic brush cut-off protects commutator from damage for longer tool life

-Accepts SDS-MAX bits

Includes

-Side Handle

-Bull Point

-Bit Grease

-Cleaning Cloth

-Tool Case

Specs

-Blows per Minute

950 - 1,900 BPM

-Impact Energy

25.5 Joules

-.

18.8 ft.lbs.

-AMPS (120V)

14.0

-Vibration (m/s2)

15.5

-Bit Type

Accepts SDS-MAX Bits

-Overall Length

22-3/4"

-Net Weight (lbs.)

20.3

-Shipping Weight (lbs.)

37.5

Makita HM1214C 27 lb. AVT Demolition Hammer; Accepts SDS-MAX Bits
MSRP $1399.00
$1019.00 USD
BuyNow
Features

-Powerful 14.0 AMP motor to handle the most demanding applications

-Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity

-Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

-Variable speed control dial enables user to match the speed to the application for greater versatility

-Soft start suppresses start-up reaction for more control and better accuracy

-L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced

-L.E.D. power light indicates switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended life brushes are longer for more work between service intervals and less downtime

-12 bit angle settings allow the bit to be set at different positions for operating convenience

-Automatic brush cut-off protects commutator from damage for longer tool life

-"No hammering when idling" function helps increase tool life

-One-touch chuck allows for quick bit changes

-Easy-to-operate slide switch increases productivity and allows for continuous use

-Rubberized ergonomic soft grip provides more comfort and control

-Side handle swivels 360° for greater control

-Accepts SDS-MAX bits

Includes

-Side Handle (135283-4)

-Bull Point (751423-A)

-Bit Grease (194683-7)

-Tool Case w/ Wheels

Specs

-Blows per Minute

950 - 1,900 BPM

-Impact Energy

25.7 Joules

-.

19.0 ft.lbs.

-AMPS (120V)

14.0

-Vibration (m/s2)

8.0

-Bit Type

Accepts SDS-MAX Bits

-Overall Length

27-1/2"

-Net Weight (lbs.)

27.1

-Shipping Weight (lbs.)

46.0

Makita HM1307CB 35 lb. Demolition Hammer; Accepts 1-1/8" Hex Shank Bits
MSRP $1339.00
$1029.00 USD
BuyNow
Features

-Powerful 14.0 AMP motor to handle the most demanding applications

-Constant Speed Control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs

-Soft Start suppresses start-up reaction for more control and better accuracy

-Variable Speed control dial enables user to match the speed to the application for greater versatility

-L.E.D. Service Light notifies the user approximately 8 hours before the brushes need to be replaced

-L.E.D. Power Lights indicate switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended Life Brushes are longer for more work between service intervals and less downtime

-Automatic Brush Cut-Off protects commutator from damage for longer tool life

-Durable blow-molded rolling tool case for safe storage and easy transportation

-"No hammering when idling" helps increase tool life

-Rubberized ergonomic soft grip provides more comfort and control

-Easy-to-operate slide switch increases productivity and allows for continuous use

-Side-handle swivels 360° for greater control

-Accepts commonly used 1-1/8'' Hex steel

Includes

-Bull Point (D-21353)

-Tool Case w/ Wheels

Specs

-Blows per Minute

730 - 1,450 BPM

-Impact Energy

34.9 Joules

-.

25.7 ft.lbs.

-Bit Type

1-1/8" Hex Shank

-AMPS (120V)

14.0

-Vibration (m/s2)

12.2

-Overall Length

32-1/2"

-Net Weight (lbs.)

38.2

-Shipping Weight (lbs.)

56.4

Makita HM1317CB 42 lb. AVT Breaker Hammer; Accepts 1-1/8" Hex Shank Bits
MSRP $1639.00
$1259.00 USD
BuyNow
Features

-Powerful 14.0 AMP motor delivers 730-1,450 BPM to handle the most demanding applications

-Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity

-Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs

-Soft start suppresses start-up reaction for more control and better accuracy

-Variable speed control dial enables user to match the speed to the application for greater versatility

-L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced

-L.E.D. power light indicates switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Extended life brushes are longer for more work between service intervals and less downtime

-Automatic brush cut-off protects commutator from damage for longer tool life

-Lock-on slide switch for continuous operation

-Rubberized ergonomic soft grip provides more comfort and control

-"No hammering when idling" function helps increase tool life

-Side handle swivels 360° for greater control

-Accepts 1-1/8" Hex Shank bits

Includes

-Bull Point (D-21353)

-Tool Case w/ Wheels

Specs

-Blows per Minute

730 - 1,450 BPM

-Impact Energy

34.9 Joules

-.

25.7 ft.lbs.

-AMPS (120V)

14.0

-Vibration (m/s2)

7.3

-Bit Type

1-1/8" Hex Shank Bits

-Overall Length

32-1/2"

-Net Weight (lbs.)

41.9

Makita HM1500B 42 lb. Demolition Hammer; Accepts 1-1/8" Hex Shank Bits
MSRP $1509.00
$1159.00 USD
BuyNow
Features

-Powerful 13.5 AMP motor delivers 1,300 BPM for the most demanding applications

-Innovative pneumatic compression system automatically adjusts air in the cylinder to minimize power loss and deliver unmatched power-to-weight ratio

-AC/DC switch for use with alternative power source

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Rubber-ringed brush holder cushions vibrations and lengthens life of brushes and armature

-Automatic brush cut-off protects commutator from damage for longer tool life

-Side handle swivels 360° for operator comfort and control

-Anti-vibration main handle reduces operator fatigue

-"No hammering when idling" function helps increase tool life

-Factory grease packed for reduced maintenance

-Accepts 1-1/8" Hex Shank bits

Includes

-Steel Tool Case

Specs

-Blows per Minute

1,300 BPM

-Impact Energy

25.0 Joules

-.

18.4 ft.lbs.

-AMPS (115V)

13.5

-Vibration (m/s2)

26.0

-Bit Type

1-1/8" Hex Shank Bits

-Overall Length

31-3/4"

-Net Weight (lbs.)

44.1

Makita HM1810 70 lb. AVT Breaker Hammer; Accepts 1-1/8" Hex Shank Bits
MSRP $2359.00
$1809.00 USD
BuyNow
Features

-Powerful 15.0 AMP motor delivers 1,100 BPM to handle the most demanding applications

-Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity

-L.E.D. power light indicates switch failure or cord damage

-Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life

-Automatic brush cut-off protects commutator from damage for longer tool life

-Lowest noise level in its class at only 107dB

-AC/DC switch for use with alternative power source

-Large, easy-to-operate switch for operator comfort and control

-16.4 ft. jobsite cord for greater versatility and instant power

-Cylindrical tool holder enables new bolt holes to be drilled should the original bolts break

-Accepts 1-1/8" Hex Shank bits

Includes

-Hex Wrench (783203-8)

-Model HM1810X3 Includes a Hammer Cart (122010-A) and 4 Bits

Specs

-Blows per Minute

1,100 BPM

-Impact Energy

46.5 ft.lbs.

-AMPS (120V)

15.0

-Noise Level (dB)

107

-Vibration (m/s2)

8

-Bit Type

1-1/8" Hex Shank Bits

-Cord Length

16.4 ft.

-Overall Length

32-1/2"

-Net Weight (lbs.)

71.3

Milwaukee 5337-21 3/4 in. Hex Demolition Hammer
MSRP $999.00
$841.25 USD
BuyNow
Features

-Heavy-Duty Robust Construction

-Two Auxiliary Handles, Carrying Case

-.

-Large electric hammer used for breaking concrete and asphalt, bushing, driving ground rods, scraping floors, digging, and tamping. This heavy-duty tool has an in-line design which provides more comfortable use when working on floors. An excellent system of vibration absorption/reduction reduces operator fatigue. The side handle can be attached to the rear switch handle which minimizes bending over. Other features include a service reminder light, soft-grip handles, and easy access for maintenance.

-.

Includes

-Includes 3/4-in Hex Demolition Hammer with Case - 5337-21

-(2) Auxiliary Handles

-Carrying Case

-Product Manual

Specs
Milwaukee 5339-21 SDS-max Demolition Hammer
MSRP $999.00
$841.25 USD
BuyNow
Features

-High Blow Energy 19.9 ft-lbs

-User Friendly Vibration Isolation System

-Heavy-Duty Robust Construction

-In-Line Design with 3 Side Handle Positions and D-Handle

-Variable Speed Control Dial

-Service Reminder Light

-Soft-Grip on All Handles

-Lock-On Trigger

-Uses Standard SDS-max Hammer Iron

Includes

-1 X Milwaukee SDS-max Demolition Hammer 5339-21

-Two Auxiliary Handles

-Carrying Case

Specs

- Voltage

120 AC Only

- Amps

14

- Steel Type

SDS MAX

- Impact Energy

19.9 ft-lbs

- No Load BPM

975-1,950

- Electronics

Yes

- Adjustable Chisel

Yes-15 Positions

- Anti-Vibration

Yes

- Bit Shank Type

SDS-max

- Cord Type

10 ft. Fixed

- Switch Type

Trigger

- Trigger Lock

On

- Electronic Feedback

Yes

- Length

27-1/2 in.

- Tool Weight

27.75 lbs.

- Shipping Weight

37.23 lbs