Dewalt DW1269 29pc Cobalt Pilot Pt Drill Bit Set up to 1/2" / With Free DWMTC Case
MSRP $159.00
$105.95 USD
BuyNow
Features

-Pilot Point (TM) HSS and Cobalt Drill Bits and Bit Sets

-Patented design eliminates walking, keeps the bit on course, and prevents lock-up at breakthrough

-Acute cutting edges increase drilling speed and produce a clean, smooth hole with minimal burrs

-Back taper minimizes friction for less wear and longer life

-Enlarged flute chamber maximizes chip removal and prevents binding when drilling deep holes

-Tool Weight

-4.0lbs

Includes

-1/16 to 1/2" by 64ths with Storage Case

-(1) Free DWMTC (case only)

Specs
Milwaukee 48-20-7497 Tapcon Installation Kit, SDS-PLUS
MSRP $59.00
$39.82 USD
BuyNow
Features

-Drill & Drive with Single Tool - SDS PLUS

-Works with 3/16" and 1/4" concrete screws

-Works with hex washer head and flat head screws

Includes

-(1) 5/32" x 7" SDS PLUS Bit with hex

-(1) 3/16" x 7" SDS PLUS Bit with hex

-(1) Drive Sleeve

-(1) 1/4" Hex Drive Bit

-(1) 5/16" Hex Drive Bit

-(1) #2 Phillips Driver Bit

-(1) #3 Phillips Driver Bit

-(1) Carrying Pouch

Specs

-Height

11.20"

-Width

4.90"

-Depth

1.80"

-Weight

0.92 lb.

Milwaukee 48-16-0756 Diamond Core Bit Premium 3/4 in.
MSRP $189.00
$145.42 USD
BuyNow
Features

-3/4 in. nominal bit size outer diameter

-5/8 in. - 11 thread size, 14 in. tube length

-Premium Series - designed to offer exceptional drilling life with smooth, steady effort

-Conforms to Diamond Core Drilling Manufacturers Association standards

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PREMIUM grade bits are designed to offer exceptional life and conform to the Diamond Core Drilling Manufacturers Association standards. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 3/4 inch and the thread is 5/8-11.

Includes
Specs
Milwaukee 48-16-1007 Diamond Core Bit Pre-Stress 1 in.
MSRP $179.00
$130.08 USD
BuyNow
Features

-1 in. nominal bit size outer diameter

-5/8 in. - 11 thread size, 14 in. tube length

-Specifically designed for maximum cutting speed

-May also be used for coring in steel reinforced concrete and asphalt

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnated crowns of specific heights and with specifically designed waterways for maximum life in pre-stress applications. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 1 inch and the thread is 5/8-11.

Includes
Specs
Milwaukee 48-16-1260 Diamond Core Bit Premium 1-1/4 in.
MSRP $249.00
$196.67 USD
BuyNow
Features

-1-1/4 in. nominal bit size outer diameter

-5/8 in. - 11 thread size, 14 in. tube length

-Premium Series - designed to offer exceptional drilling life with smooth, steady effort

-Conforms to Diamond Core Drilling Manufacturers Association standards

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PREMIUM grade bits are designed to offer exceptional life and conform to the Diamond Core Drilling Manufacturers Association standards. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 1-1/4 inch and the thread is 5/8-11.

Includes
Specs
Milwaukee 48-16-1506 Diamond Core Bit Premium 1-1/2 in.
MSRP $269.00
$205.08 USD
BuyNow
Features

-1-1/2 in. nominal bit size outer diameter

-5/8 in. - 11 thread size, 14 in. tube length

-Premium Series - designed to offer exceptional drilling life with smooth, steady effort

-Conforms to Diamond Core Drilling Manufacturers Association standards

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PREMIUM grade bits are designed to offer exceptional life and conform to the Diamond Core Drilling Manufacturers Association standards. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 1-1/2 inch and the thread is 5/8-11.

Includes
Specs
Milwaukee 48-16-1507 Diamond Core Bit Pre-Stress 1-1/2 in.
MSRP $199.00
$164.50 USD
BuyNow
Features

-1-1/2 in. nominal bit size outer diameter

-5/8 in. - 11 thread size, 14 in. tube length

-Specifically designed for maximum cutting speed

-May also be used for coring in steel reinforced concrete and asphalt

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PRE-STRESSED bits have diamond impregnated crowns of specific heights and with specifically designed waterways for maximum life in pre-stress applications. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 1-1/2 inch and the thread is 5/8-11.

Includes
Specs
Milwaukee 48-16-2007 Diamond Core Bit Standard 2 in.
MSRP $229.00
$189.00 USD
BuyNow
Features

-2 in. nominal bit size outer diameter

-1-1/4 in. - 7 thread size

-General purpose bit designed specifically for coring smaller numbers of specific size holes

-Conforms to Diamond Core Drilling Manufacturers Association standards

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our CONTRACTOR SERIES bits have crowns and diamond segment designed for low cost drilling of smaller numbers of specific sized holes. A 14 inch tube length is standard. The bit incorporates a 1-1/4 - 7 threaded back for attachment to the Diamond Drill Motor. A Thread adapter may be needed to attach this bit to your diamond drill motor. Check drill thread specifications. The Diameter of this bit is 2 inch.

Includes
Specs
Milwaukee 48-16-2013 Diamond Core Bit Premium 2 in.
MSRP $339.00
$283.83 USD
BuyNow
Features

-2 in. nominal bit size outer diameter

-1-1/4 in. - 7 thread size, 14 in. tube length

-Premium Series - designed to offer exceptional drilling life with smooth, steady effort

-Conforms to Diamond Core Drilling Manufacturers Association standards

-.

-Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our PREMIUM grade bits are designed to offer exceptional life and conform to the Diamond Core Drilling Manufacturers Association standards. A 14 inch tube length is standard. The bit incorporates a threaded back for attachment to the Diamond Drill Motor. The Diameter of this bit is 2 inch and the thread is 1-1/4-7.

Includes
Specs
Milwaukee 48-28-4006 Bit Extension 12 in.
MSRP $19.99
$16.50 USD
BuyNow
Features

-7/16 in. hex shank

-For selfeed bits, auger bits and hole saw 1 in. diameter and larger with 7/16 in. shank

-12 in. length

-.

-Extend your reach a full 12 inches when drilling with Milwaukee Selfeed Bits, Auger Bits and Hole Saws. The Quick Change shank is 7/16 inch hex. The 7/16 inch hex fits both 3 jawed chucks, 1/2 inch drill capacity and larger, as well as 7/16 inch Quick Change chucks.

Includes

-(1) Bit Extension 12 in.

Specs
Milwaukee 48-28-4008 3/8" x 12" Bit Extension
MSRP $14.99
$9.97 USD
BuyNow
Features

-3/8" hex shank

-12 in. length

-For 3/8" hex shank hole saw arbors

-.

-Extend you reach a full 12 inches when drilling with Milwaukee® hole saw arbors. The 3/8" hex fits 3-jawed chucks, 3/8" drill capacity and larger.

Includes

-(1) 3/8" x 12" Bit Extension

Specs
Milwaukee 48-28-4011 Bit Extension 18 in.
MSRP $23.99
$19.33 USD
BuyNow
Features

-7/16 in. hex shank

-18 in. length

-For selfeed bits, auger bits and hole saw 1 in. diameter and larger with 7/16 in. shank

-.

-Extend your reach by 18 inches when drilling with Milwaukee Selfeed Bits, Auger Bits and Hole Saws. The Quick Change shank is 7/16 inch hex. The 7/16 inch hex fits both 3 jawed chucks, 1/2 inch drill capacity and larger, as well as 7/16 inch Quick Change chucks.

Includes

-(1) Bit Extension 18 in. Buy Local BUY ONLINE

Specs
Milwaukee 49-56-8010 1/4" x 3-1/2" High Speed Steel Pilot Bit
MSRP $3.49
$2.58 USD
BuyNow
Features

-Thunderbolt® tapered web for added durability

-135° split point provides accurate hole placement

-3-flat shank won't slip in arbor or chuck

-Parabolic flute clears chips faster

-.

-Milwaukee® Thunderbolt® pilot bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.

Includes

-(1) 1/4" x 3-1/2" High Speed Steel Pilot Bit

Specs

-Diameter

1/4"

-Length

3-1/2"

Milwaukee 49-56-8031 1/4" x 4" High Speed Steel Pilot Bit (12 pack)
MSRP $2.99
$2.28 USD
BuyNow
Features

-Thunderbolt® tapered web for added durability

-135° split point provides accurate hole placement

-3-flat shank won't slip in arbor or chuck

-Parabolic flute clears chips faster

-.

-Milwaukee® Thunderbolt® pilot bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.

Includes

-(12) Pieces of Part Number 49-56-8000

Specs

-Diameter

1/4"

-Length

4"

Milwaukee 49-56-8033 1/4" x 3-1/2" High Speed Steel Pilot Bit (12 pack)
MSRP $2.99
$2.22 USD
BuyNow
Features

-Thunderbolt® tapered web for added durability

-135° split point provides accurate hole placement

-3-flat shank won't slip in arbor or chuck

-Parabolic flute clears chips faster

-.

-Milwaukee® Thunderbolt® pilot bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.

Includes

-(12) Pieces of Part Number 49-56-8010

Specs

-Diameter

1/4"

-Length

3-1/2"