Dewalt D51236K 18 Gauge 1-1/4" Brad Nailer Kit
MSRP $159.00
$99.00 USD
BuyNow
Features

-Tool-free thumb wheel depth setting for quick and easy depth adjustments

-Side low-nail indicator window allows user to quickly and easily see when it is time to re-load

-Overmolded no-mar pad increases visibility and reduces marring on material

-Tool-free jam clear eliminates down-time from bent fasteners caught in the nosepiece

-Tool-free 360° exhaust channels air and dust away from user

-Trigger lock-off allows trigger to be disabled when not in use

Includes

-DEWALT® Safety Glasses

-Allen wrench

-Kit Box

Specs

-Nail Diameter

18gauge

-Nail Length Capacity

5/8 - 1-1/4

-Magazine Angle

Straight

-Magazine Capacity

110nails

-Magazine Loading

Side load

-Operating Pressure

70-120psi

-Depth Setting

Tool-free thumb wheel depth setting

-No Mar Pad

Low profile rubber

-Integrated Belt Hook

None

-Jam Clearing

Tool-free front opening

-Exhaust

360°

-Padded Grips

Textured anti-slip comfort grip

-Trigger Lock-Off

Yes

-Firing Mode

Sequential trigger SA

-Tool Weight

2.4lbs

-Shipping Weight

6.0lbs

Dewalt DC608B 18V Cordless 2" 18 Gauge Brad Nailer (Tool Only)
MSRP $429.00
$239.99 USD
BuyNow
Features

-Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints

-Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.

-Straight magazine, accepts 18 gauge nails ranging in legths from 5/8" to 2"

-Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches

-Contact Trip Lock-Off allows trigger to be disabled when not in use

-Integrated LED lights for long life and durability

-Top cap is impact resistant and easy to remove for troubleshooting

-Provides increased portability and versatility on the job-site.

-Increased visibility and durability along with protection for work-surface from the contact-trip.

-12 position dial allows the user to move between applications without having to re-acquire exact depth setting

-Fully enclosed, box style magazine, keep dust and debris out of the magazine preventing the tool from malfunctioning

Includes

-reversible belt hook

-owner's manual

-DEWALT safety glasses

-Battery and Charger Sold Seperately

Specs

-Voltage

18V

-Nailer Operating Mode

Selective

-Front Handle Style

Nailing rate 4-5 nails/sec

-Nail Diameter

18gauge

-Magazine Angle

Straight°

-Nail Length Capacity

5/8" - 2"

-Magazine Capacity

110 nails

-Magazine Loading

Box style

-Integrated Belt Hook

Yes

-Jam Clearing

Yes

-Tool Weight

7.4lbs

Makita AF505 2" Brad Nailer
MSRP $179.00
$97.00 USD
BuyNow
Features

-Drives a range of 18 gauge brad nails, from 5/8

-Quick release cam-lock opens nail guide assembly to easily clear jammed nails; efficient design minimizes downtime

-Easy to use

-Non-marring rubber nose and bumpers protect the wood's surface from being scratched or damaged

-Tool hook can be rotated 180° so tool can remain close by, but never in the way

-Cast and machined nose piece for precise contact

-Dual nail reload indicator window alert the user when to reload nails to avoid blank drives

-Multi-directional exhaust port rotates 360° to direct exhaust air away from user

-Rubberized soft grip provides more comfort and control

Includes

-Oil Supply (181434-7)

-Non-mar Tip (HY00000030)

-Safety Goggles (191687-A)

-Tool Case (HY00000090)

Specs

-Operating Air Pressure (PSI)

60 - 115

-Nail Size

5/8

-Magazine Capacity

100

-Dimensions (LxWxH)

10-1/4

-Net Weight (lbs.)

3.0

Hitachi NT50AE2 18-Gauge 5/8-Inch to 2-Inch Brad Nailer
MSRP $149.00
$69.00 USD
BuyNow
Features

-New selective actuation switch lets the user easily select bump fire or sequential fire modes

-At only 2.2 lbs, it is well balanced and lightweight to make finish work a breeze

-Elastomer grip adds comfort while preventing slippage

-Visual nail reload indicator located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

-Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use

-Engineered with the safety behind the narrow nosepiece and short center height to allow for nail placement in hard to reach areas and corners

-Depth of drive dial allows the user to easily adjust the drive depth for a professional finish

-No-mar tip on the nose protects the work piece from markings

-360 degree adjustable exhaust port keeps dust, debris and oil off the finish project

-Lightweight aluminum body and composite magazine provide for a tool that reduces user fatigue

Includes

-(1) Hitachi 18Ga 5/8 in. to 2 in. Brad Nailer (NT50AE2)

-(1) Safety Glasses (875769)

-(1) Air Fitting

-(1) Hex Bar Wrench

-(1) Carry Case (885902)

-(1) No-Mar Tip

Specs

-Weight

2.2 lbs

-Dimensions (LxH)

10

-Operating Pressure

70 to 120 psi

-Nail Range

5/8"

-Nail Capacity

100 Nails

-Magazine

Side Load

-Driving Power

1

-Center Height

7mm (.276

-Firing Mode

Single/Contact

-Depth Adjustment

Yes (horizontal dial)

-Adjustable Exhaust Port

Yes (top)

-Jam Clearing Mechanism

Yes (front lever)

-Exhaust Muffler

No

-Belt Hook

No

-Body Type

Aluminum

-Magazine Type

Composite

Porter Cable BN138R 18 Gauge 1-3/8-in Oil-Free Brad Nailer Kit
MSRP $49.00
$35.95 USD
BuyNow
Features

-Designed to have a long life by utilizing a maintenance-free motor

-Uses an internal piston catch so you have maximum power delivered on every shot

-Has a rear positioned exhaust that keeps debris away from your work area

-Can drive 18 gauge brads that are 5/8-in to 1-3/8-in in length

-Has a No tool needed depth-of-drive adjustment that has detents that allow for proper setting of nail heads

Includes

-1 X Factory-Reconditioned Porter-Cable BN138R 18 Gauge 1-3/8-in Oil-Free Brad Nailer Kit

Specs

-Capacity

5/8-in to 1-3/8-in

-Gauge

18 Ga.

Porter Cable PIN100 23 Gauge 1-in Pin Nailer Kit
MSRP $189.00
$119.00 USD
BuyNow
Features

-Uses 23 Gauge micro pin nails similar to Senco models

-From 1/2-in to 1-in long

-Tool automatically adjusts for different fastener lengths. Easier loading and less problems with pins out of spec.

-Bottom load magazine holds 170 pin micro nails

-Dual trigger feature

-Nail reload indicator

-Rear exhaust design to keep oil condensation away from work

-Rubber comfort grip on tool handle

Includes

-1 X Porter Cable 23 Gauge 1-in Pin Nailer Kit - PIN100

-(2,000) 3/4-in Pin Nails

-1/4-in Plug w/ Cap

-Oil

-Carrying Case

-Operating Manual

Specs

-Magazine Capacity

170 Pins

-Firing Modes:

Dual trigger feature

-Operating Pressure:

60-100 psi

-Fastener Type:

23 ga. Pin Nails

-Fastener Range:

1/2-in - 1 in

-Height

6.25

-Length

9

-Weight

5 lbs.

Paslode 901000 IM200-F18 Cordless 18 Gauge Brad Nailer
MSRP $449.00
$339.95 USD
BuyNow
Features

--Cordless - Featuring Impulse® Technology. No hoses or compressors needed

--Quick-Clear Nose - Should nail jam occur

--Adjustable Work Contact Element - Provides control of nail setting depth

--Drives 18 Gauge Finish Nails - Leaves small hole

--Powerful Motor - Drives 5/8-inch to 2-inch fasteners into the hardest woods

--Long Narrow Nose - Precise placement of fasteners in tight spots

Includes

--Convenient Carrying Case

--Rechargeable Battery

--Battery Charger

--Safety Glasses

--Owners Manual

--Extra Allen Wrench

Specs

-Continuous Operation

1,000 nails/hr

-Intermittent Operation

2-3 nails/second

-Fuel Cell Life

1,200 nails (approx)

-Battery Charge

4,000 nails (approx)

-Weight

4.9 lbs. with battery

-Nail Range

5/8-inch to 2-inch

-Magazine Type

Straight

-Nail Capacity

100 (2 strips)

-Fasteners

Straight Finish Nails 5/8-inch - 2-inch 18 Gauge Smooth Galvanized

Hitachi NV65AH 2-1/2'' Coil Siding Nailer
MSRP $499.00
$349.00 USD
BuyNow
Features

-4.6lbs, lightweight and compact for easy maneuverability

-Depth of drive adjustment to countersink or flush drive nails

-Drives wire and plastic sheet collated nails for added flexibility

-Adjustable air deflector, directs the air exhaust in any direction

-No mar nose cap attachment protects material from accidental marks

-Plastic shield, deflects wire collation for added safety

-Long-lasting rubber grip, for added comfort

Includes

-1 X 2-1/2" Coil Siding Nailer

-Safety Glasses (875769)

-3mm, 4mm, 5mm Hex Bar Wrenches (943277, 944458, 944459)

-No Mar Nose Cap (878344)

Specs

-Fastener Type

Coil, Wire/Plastic Sheet Collation

-Magazine Angle

16-Degrees (wire) 15-Degrees (plastic)

-Fastener Length Capacity

1-1/2" - 2-1/2"

-Fastener Diameter Range

.090 - .099

-Magazine Capacity

200-300

-Magazine Loading

Side

-Air Inlet

3/8"

-Operating Pressure

70-120psi

-Actuation

Contact Optional Sequence

-Air Consumption

.049(FT3/Cycle@100psi)

-L x W x H

10-1/2" x 5-1/6" x 11-13/16"

-Tool Weight

4.6lbs

King 8225N 3/4" - 2-1/2" Brad Nailer Kit (16 G)
MSRP $130.81
$108.74 USD
BuyNow
Features

-Special one piece hardened driver for long, trouble-free performance

-Nail view finder shows quantity of nails in magazine

-Quick release latch for clearing jams

-Adjustable air deflector controls the direction of air exhaust

-Sequential and bump firing modes

-Comes with 1/4" air inlet, oiler, hex. keys, and sturdy carrying case

Includes

-(1) 16 G, 3/4" - 2-1/2" Brad Nailer (8225N)

-1/4" air inlet

-Oiler

-Hex. keys

-Carrying case

Specs

-Nail size

16GA.

-Nail size range

3/4” - 2 1/2”

-Magazine capacity

100

-Operating pressure

60-100 PSI

-Air consumption

6 CFM (60-100 PSI)

-Nailer discharge rate

120 / min.@90 PSI

-Length

11-1/4"

-Width

2-3/4"

-Height

12"

-Weight

4.5 lbs

King 8210NS 2 In 1 -18 GA. Nailer/Stapler Kit, 3/4" - 2"
MSRP $85.70
$71.24 USD
BuyNow
Features

-Powerful nailer/stapler drives standard 18 Ga. brad nails and 18 Ga. 1/4" narrow crown staples

-Special one piece hardened driver for long, trouble-free performance

-View finder shows quantity of nails or staples in magazine

-Quick release latch for clearing jams

-Adjustable air deflector controls the direction of air exhaust

-Sequential and bump firing modes

-Comes with 1/4" Air inlet, oiler, hex. keys and sturdy carrying case

Includes

-(1) 2 In 1 -18 GA. Nailer/Stapler (8210NS)

-1/4" Air inlet

-Oiler

-Hex keys

-Carrying case

Specs

-Nail size

18 Ga.

-Nail size range

3/4” - 2”

-Staple size

18 Ga. x 1/4”

-Staple size range

3/8” - 1-5/8”

-Magazine capacity

100

-Operating pressure

60-100 PSI

-Air consumption

6.5 CFM (60-100 PSI)

-Nailer/stapler discharge rate

180/min. @ 60 PSI

-Length

10"

-Width

2-1/4"

-Height

10-1/4"

-Weight

3.6 lbs

King 8241FNS 4-In-1 18 Ga. Brad Nailer/Stapler & Flooring Nailer/Stapler Kit
MSRP $130.81
$108.74 USD
BuyNow
Features

-Powerful nailer/stapler and flooring nailer/stapler drives standard 18 Ga. brad nails and 18 Ga. 1/4” crown staples

-Interchageable quick release driver guide covers for brad nailer/stapler mode or flooring nailer/stapler mode

-Special one piece hardened driver for long, trouble-free performance

-Flooring nail/staple depth adjustment dial quickly sets fastener depth

-Sequential firing mode

-Adjustable composite non-marring base to suit a variety of flooring thicknesses

-Adjustable composite non-marring base to suit a variety of flooring thicknesses

-Adjustable 3600 air deflector controls the direction of air exhaust

-Comes with 1/4” air inlet, oiler, hex. keys & sturdy carrying case

Includes

-(1) 4-In-1 18 Ga. Brad Nailer/Stapler & Flooring Nailer/Stapler (8241FNS)

-1/4” Air inlet

-Oiler

-Hex keys

-Carrying case

Specs

-Nail size

18 Ga.

-Nail size range

5/8” - 1-5/8”

-Staple size

18 Ga. x 1/4”

-Staple size

1/2” - 1-5/8”

-Magazine capacity

100 nails/clous, 80 staples/crampes

-Operating pressure

110 PSI

-Air consumption

2-4 CFM (70-115 PSI)

-Stapler discharge rate

120/min@ 90 PSI

-Length

10-1/2"

-Width

4"

-Height

10"

-Weight

3.5 lbs

King 8260FSN-2 2 In 1 - 2” Flooring Stapler/Cleat Nailer Kit
MSRP $237.41
$197.35 USD
BuyNow
Features

-Powerful 2 in 1 flooring stapler/nailer drives standard 15-1/2 ga. x 1/2" crown staples from 1" to 2" and standard 16 ga. cleat nails from 1-1/2" to 2"

-Lightweight die-cast aluminum body reduces fatigue

-Special one piece hardened driver for long, trouble-free performance

-Composite non-marring base is designed to reduce scratches and damage to the surface of the wood

-Additional composite non-marring base to suit a variety of flooring thicknesses

-Additional composite non-marring base to suit a variety of flooring thicknesses

-Comes with mallet, 1/4" air inlet, safety glasses, oiler, hex. keys & sturdy carrying case

Includes

-(1) 2 In 1 - 2” Flooring Stapler/Cleat Nailer (8260FSN-2)

-Mallet

-1/4" air inlet

-Safety Glasses

-Oiler

-Hex. keys

-Carrying case

Specs

-Staple size

15 1/2 Ga. x 1/2”

-Staple size range

1” - 2”

-Cleat nail size

16 Ga.

-Cleat nail size range

1-1/2” - 2”

-Magazine capacity

60

-Operating pressure

100 PSI

-Air consumption

7 CFM (70-120 PSI)

-Discharge rate

30/min.@ 90 PSI

-Length

18-1/2"

-Width

3-1/2"

-Height

21"

-weight

13 lbs

King 8266FSN-3 3 in 1 - 2” Flooring stapler/cleat nailer kit
MSRP $269.09
$223.68 USD
BuyNow
Features

-Powerful 3 in 1 flooring stapler/nailer drives standard 15-1/2 ga. x 1/2” crown staples from 1-1/2” to 2” and standard 16 ga. “L” cleat and “T” cleat nails from 1-1/2” to 2”

-Lightweight die-cast aluminum body reduces fatigue

-Special one piece hardened driver for long, trouble-free performance

-5/8” & 3/4” composite non-marring bases are designed to suit a variety of flooring thicknesses and reduce scratches and damage to the surface of the wood

-100 PSI operating pressure for peak performance

-Comes with nylon-fibreglass mallet, 1/4” air inlet, safety glasses, oiler, hex. keys & sturdy carrying case

Includes

-(1) 2 In 1 - 2” Flooring Stapler/Cleat Nailer (8260FSN-2)

-Nylon-fibreglass mallet

-1/4” air inlet

-Safety Glasses

-Oiler

-Hex. keys

-Carrying case

Specs

-Staple size

15 1/2 Ga. x 1/2”

-Staple size range

1-1/2” - 2”

-“L” and “T” cleat nail size

16 Ga.

-“L” and “T” cleat nail size range

1-1/2” - 2”

-Magazine capacity (staples/nails)

90/100

-Operating pressure

100 PSI

-Air consumption

6.1 CFM (70-110 PSI)

-Discharge rate

30/min.@ 90 PSI

-Length

17"

-Length

4"

-Height

22-1/2"

-Weight

12 LBS

Bostitch U/N62FNK-2 15-Gauge Oil-Free Angled Finish Nailer RECONDITIONED
MSRP $169.99
$119.00 USD
BuyNow
Features

-World’s First 15ga tool with ultra-quiet rear exhaust to direct air away from the user

-Integrated air blower allows user to clear away debris fromwork surface (patent-pending)

-LED work-light for working in closets and dark spaces

-Adjustable trigger with safety lock-out allows the user to choose between single or multiple fastener drive mode

-16" on-center gauge fl ips out for quick and easy installation of baseboard (patent-pending)

-Other features include: Oil-free operation, rear trip design for clear line-of-sight and dial-a-depth adjustment for precise fastener placement

Includes

-(1) RECONDITIONED Bostitch 15-Gauge Oil-Free Angled Finish Nailer (N62FNK-2)

Specs

-Adjustable exhaust port

Yes

-Loading type

Strip

-Nailgun Angle

34

-Nail Gauge

15

Paslode IM200-F18 18 Gauge Cordless Brad Nailer, 5/8" to 2 #901000
MSRP $349.99
$249.99 USD
BuyNow
Features

-Cordless mobility means less mess & clutter, no dirty hoses to drag around!

-Powerful, drives 5/8" - 2" nails into the hardest woods

-No mar tip protects wood

-Lightweight well balanced, it's easy on the arms!

-Tool-free depth of drive nail adjustment

-Nail lockout prevents blank firing

Includes

-(1) Paslode 18 Gauge Cordless Brad Nailer, 5/8" to 2 #901000

Specs

-Part #

901000

-Weight

4.9lbs w/battery